Traditional Dining Room Nook

Matching Bar Stools Window Treatments For Living Room And Dining Room Traditional Dining Room Nook

Bathroom Renovation - A Step by Step Guide

Bathrooms are probably the smallest rooms in the home plus they are also the most costly to renovate. Bathroom renovation is really a job that, if done well, can add value to some home and a great space filled with design and light-weight.
Traditional Dining Room Nook

Bathroom design
Bathroom design will be the first section of your bathrooms renovation you ought to get right. Just replacing the prevailing bathroom with similar design is probably not enough. The key to great bathroom design is always to design it using the people who are going to use it planned. However make sure that your bathrooms design boasts an overall use factor also.

For example: If you were designing a bath room for families you might still design the toilet with quick access to the shower and bath. This would make certain that the look would recieve treatment for those who have limited mobility. This means if you decide to sell your home or if you might be renovating for profit your design has a wider market appeal. Great bathroom design also uses the space well, taking into consideration the sunlight or window space, size fittings, and drainage options. Draw out a plan to scale and right down the sizes of the room. Mark the present drainage points and then and water inlet points. Write down a wish report on the lavatory fittings to wish and want making use of their sizes. Now marry the two together and find out what fits. Note: Most bathroom drainage and water inlet points can be moved but this certainly does come at extra cost.
Sophias: Details in the Dining Room

Bathroom remodel
If you decide to complete the task yourself or part of the project it can be time to hire a skip bin and take out the previous bathroom. If your property was developed pre 1980 maybe you have fibro bathroom wall linings with asbestos in it and great care should be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with your local building authority or council concerning the regulation on bathroom asbestos wall lining removal.
Remove everything except the plumbing. If you keep the bathroom plumbing in place you do not ought to turn water off for the complete house. Also you will have to jack hammer the ground tiles up as well as the sand and cement bed that they are laid on.
Window Design Ideas: Bay Windows  Better Homes  Gardens

Bathroom Renovation and construction
Bathrooms should be construction properly through the ground-up to be sure that the finished job is correct and true. This also ensures the look and appear of the toilet can have a fantastic finish
The Bathroom Renovation Process

Install water and drainage pipe and electrical wires.

Install wall lining and ceiling then install the tub hob and bath.

Waterproof the floor and shower and bath recess.

Correct the fall of the bottom with sand and cement ready for tiling.

Lay floor and wall tiles and then grout.

Install new bathroom vanity, fittings, and taps - install new electrical.
Stylish Dining Room Decorating Ideas  Southern Living


Paint ceiling and final  one - Plumbing and electrical
At now new plumbing is installed for clean hot and cold water and drainage. Careful attention needs to be taken when positioning the newest plumbing so that the plumbing fittings are correct once the tiling is finished. For example: To centre a fitting in a very shower recess you should consider the thickness with the wall board, tile glue and tile so the fitting will be centred after the tiles are set up. The same relates to installing drainage pipes for any toilet; the wall lining and tile thickness should be looked at hence the pipe is in the correct position when the toilet is installed after tiling. Also rough inside the any new electrical wires without connecting them on the mains power.
Berkwood Residential  Mediterranean  Dining Room  Sacramento  by Murray Duncan Architects Inc.

Step two - Install wall and ceiling linings
Install your 6mm wall lining fostering to nail the fibro board every 150mm without nailing into the new pipes and electrical wires. The best way would be to measure and mark the pipe and wire layout on your new wall board which has a pencil when you go. Screw up (or nail) the ceiling lining, plasterboard could be the most common. However if you happen to be laying your tiles from floor to ceiling do not install the cornice because best done after tiling. If you might be not tiling towards the ceiling go on and install the cornice following the wallboard and ceiling lining happen to be installed. Also if your bath is just not freestanding you can now make up the frame and install the bathtub. Ensure the bathtub is installed correctly permitting the thickness with the tiles and  sure to check all linings and pipes when you continue with your bathroom renovation.

Sophias: Details in the Dining Room
Traditional Dining Room Nook

Step three - Waterproof a bath room
Waterproof a bath room floor, shower recess, and around the bath. When waterproofing the floor ensure that the waterproofing comes 100mm inside the walls. The shower recess will need to be waterproofed 100mm across the shower rose outlet. Also the tub must be waterproofed 100mm above the lip with the bath right around and towards the floor. At the doorway install a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof in the lip. Your whole bathroom should now the tanked, so the all water is only going to go down a drain. Bathroom waterproofing tip: waterproofing is an easy job but quality and accuracy is most significant.
Step four - Lay inside cement screed for the bottom.

Before a floor tiles can laid the bottom have to be smooth and fairly flat having a slight fall to the drainage outlet. To do this you have to use sand and cement mix and it is better to add a waterproofing agent into this too. With a level, set the floor level with the doorway. Use the top aluminum angle as the finished floor level and measure around the thickness in the tile plus 10mm to the glue. Mark around the restroom using a level after which screed inside your sand and cement mix which has a 1 to 3 degree fall towards the top of the drain outlet. Take your time and get it right while using finished level as smooth as you possibly can. When the sand cement mix has set but isn't dry (you are able to walk onto it but you will still be a little soft) rub it over with a house brick. This will remove all the small highs and lows and check using a level as you go. Let the bathroom floor fully dry after which you really should have a great surface to tile onto. Tip: the more work you add into the ground screed the easier your tiling will be.
Window Design Ideas: Bay Windows Better Homes Gardens
Sophias: Details in the Dining Room

Step five: Tile floor and walls
Lay your tiles on the bottom first and after that grout. Then lay your wall tiles making certain that they are level because you lay. Once the restroom tiles happen to be cut and laid, grout your tiles and after that buff the tiles clean.
Step six: Install plumbing fitting and fixtures
Install your plumbing fittings and taps. Also fit all of your towel rails and soap holders. Fit your new bathroom vanity ensuring it can be level and sealed across the top with silicone and also seal around the bath. Tip: make sure they are in the right place before you drill into the tiles.
Stylish Dining Room Decorating Ideas Southern Living
Window Design Ideas: Bay Windows  Better Homes  Gardens

Step seven: painting, and cleaning - enjoy
Paint your ceiling and execute a final clean ensuring it is all totally fitted correctly knowning that there are no leaks in your plumbing. - Enjoy a new bathroom.

Comments