tiny house plans Ghana Homes 3 Bedroom Single Storey Family House Plan Tiny Homes

Single Family Home Designs Single Family Home Designs tiny house plans Ghana Homes 3 Bedroom Single Storey Family House Plan Tiny Homes

Bathroom Renovation - A Step by Step Guide

Bathrooms are some of the smallest rooms in the house plus they are also the most expensive for renovate. Bathroom renovation is really a job that, if done well, may add value with a home plus a great space full of design and lightweight.
tiny house plans  Ghana Homes 3 Bedroom Single Storey Family House Plan  Tiny Homes

Bathroom design
Bathroom design may be the first area of your bathrooms renovation you should get right. Just replacing the prevailing bathroom with the same design might not be enough. The key to great bathroom design would be to design it using the people who will utilize it at heart. However make sure that your bathroom design also offers a broad use factor as well.

For example: If you were designing a bath room for families you might still design the lavatory with quick access on the shower and bath. This would ensure that the design would work for those who have limited mobility. This means if you sell your house or if you are renovating for profit your design carries a wider market appeal. Great bathroom design also uses the space well, taking into account the lighting or window space, size of fittings, and drainage options. Draw out an agenda to scale and down the sizes of one's room. Mark the prevailing drainage points and after that and water inlet points. Write down a wish list of the lavatory fittings to wish and need using sizes. Now marry the 2 together and find out what fits. Note: Most bathroom drainage and water inlet points could be moved but this may come at extra expense.
Building a Secondary Suite  City of Surrey

Bathroom remodel
If you have decided to complete the project yourself or part of the work it is time to employ a skip bin and retrieve that old bathroom. If your house was developed pre 1980 you may have fibro bathroom wall linings with asbestos within it and great care will have to be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with your local building authority or council in connection with regulation on bathroom asbestos wall lining removal.
Remove everything except the plumbing. If you keep the toilet plumbing in place you won't must turn water off for the entire house. Also you will have to jack hammer a floor tiles up and also the sand and cement bed that they are laid on.
New Single Family Homes  Heartland Homes

Bathroom Renovation and construction
Bathrooms should be construction properly in the ground-up to make sure that the finished job is correct and true. This also ensures the design and look of the restroom may have an incredible finish
The Bathroom Renovation Process

Install water and drainage pipe and electrical wires.

Install wall lining and ceiling then install the tub hob and bath.

Waterproof the floor and shower and bath recess.

Correct december a floor with sand and cement ready for tiling.

Lay floor and wall tiles after which grout.

Install new bathroom vanity, fittings, and taps - install new electrical.
tiny house plans  Ghana Homes 3 Bedroom Single Storey Family House Plan  Tiny Homes


Paint ceiling and final  one - Plumbing and electrical
At this point new plumbing is installed for clean cold and hot water and drainage. Careful attention needs to be taken when positioning the new plumbing so that the plumbing fittings are correct if the tiling is finished. For example: To centre a fitting in a very shower recess you must think about the thickness with the wall board, tile glue and tile hence the fitting will be centred after the tiles are in place. The same refers to installing drainage pipes to get a toilet; the wall lining and tile thickness should be taken into consideration hence the pipe is in the correct position when the toilet is installed after tiling. Also rough inside any new electrical wires without connecting them on the mains power.
RED Design Ltd.  Single Family House Plans

Step two - Install wall and ceiling linings
Install your 6mm wall lining fostering to nail the fibro board every 150mm without nailing into the new pipes and electrical wires. The best way is usually to measure and mark the pipe and wire layout onto your new wall board which has a pencil when you go. Screw up (or nail) the ceiling lining, plasterboard may be the most common. However if you happen to be laying your tiles from floor to ceiling tend not to install the cornice because this is done after tiling. If you're not tiling to the ceiling just install the cornice following the wallboard and ceiling lining have been installed. Also if your bath isn't freestanding it's simple to form the frame and install the bathtub. Ensure the tub is installed correctly permitting the thickness with the tiles and  sure to evaluate all linings and pipes before you decide to continue with a bath room renovation.

Building a Secondary Suite City of Surrey
tiny house plans  Ghana Homes 3 Bedroom Single Storey Family House Plan  Tiny Homes

Step three - Waterproof your bathrooms
Waterproof your bathrooms floor, shower recess, and around the tub. When waterproofing the ground make sure that the waterproofing comes 100mm in the walls. The shower recess will need to be waterproofed 100mm above the shower rose outlet. Also the tub should be waterproofed 100mm higher than the lip from the bath about and towards the floor. At the doorway use a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof in the lip. Your whole bathroom should now the tanked, and so the all water will simply drop a drain. Bathroom waterproofing tip: waterproofing is an easy job but quality and accuracy is most important.
Step four - Lay inside the cement screed for the ground.

Before a floor tiles can laid the ground has to be smooth and fairly flat with a slight fall towards the drainage outlet. To do this you need to use sand and cement mix in fact it is best to add a waterproofing agent into this at the same time. With a level, set a floor level in the doorway. Use the top aluminum angle because the finished floor level and measure down the thickness from the tile plus 10mm for that glue. Mark right around the restroom having a level and after that screed inside your sand and cement mix with a 1 to 3 degree fall for the top of the drain outlet. Take your time and obtain it right using the finished level as smooth as possible. When the sand cement mix has set but is just not dry (you are able to walk into it but you will still be a lttle bit soft) rub it over with a house brick. This will remove every one of the small highs and lows and appearance which has a level as you go. Let the bathroom floor fully dry then you must have a fantastic surface to tile onto. Tip: the harder work you add into the bottom screed the simpler your tiling will probably be.
New Single Family Homes Heartland Homes
Building a Secondary Suite  City of Surrey

Step five: Tile floor and walls
Lay your tiles on the floor first and then grout. Then lay your wall tiles making sure actually level as you lay. Once the bathroom tiles happen to be cut and laid, grout your tiles and then buff the tiles clean.
Step six: Install plumbing fitting and fixtures
Install your entire plumbing fittings and taps. Also fit all of your towel rails and soap holders. Fit a new bathroom vanity making sure it is level and sealed round the top with silicone and also seal around the tub. Tip: make sure they are in the right place prior to deciding to drill to your tiles.
tiny house plans Ghana Homes 3 Bedroom Single Storey Family House Plan Tiny Homes
New Single Family Homes  Heartland Homes

Step seven: painting, and cleaning - enjoy
Paint your ceiling and execute a final clean making sure things are all fitted correctly knowning that there are no leaks within your plumbing. - Enjoy your new bathroom.

Comments