MultiFamily House Plan First Floor 055D0865 BEAUTIFUL units in both sides of this Duplex

Single Family Home Designs Single Family Home Designs MultiFamily House Plan First Floor 055D0865 BEAUTIFUL units in both sides of this Duplex

Bathroom Renovation - A Step by Step Guide

Bathrooms are some of the smallest rooms in the house plus they are also the most expensive to renovate. Bathroom renovation can be a job that, if done well, can also add value with a home and a great space filled with design and light.
MultiFamily House Plan First Floor 055D0865 BEAUTIFUL units in both sides of this Duplex

Bathroom design
Bathroom design will be the first part of your bathroom renovation you should get right. Just replacing the prevailing bathroom sticking with the same design will not be enough. The key to great bathroom design is always to design it while using folks that are likely to put it to use at heart. However make certain that a bath room design boasts an overall use factor as well.

For example: If you were designing your bathrooms for families you may still design the restroom with easy access towards the shower and bath. This would make sure that the style would also work for those who have limited mobility. This means if you sell your house or if you are renovating for profit your design carries a wider market appeal. Great bathroom design also uses space well, considering the light or window space, sized fittings, and drainage options. Draw out a plan to scale and down the sizes of one's room. Mark the prevailing drainage points and after that and water inlet points. Write down a wish listing of the toilet fittings to require and desire making use of their sizes. Now marry both the together and discover what fits. Note: Most bathroom drainage and water inlet points may be moved but this may come at extra cost.
Discovery IV  Marrano Homes

Bathroom remodel
If you have decided to do the work yourself or part of the task it's time to employ a skip bin and grab the old bathroom. If your property is made pre 1980 you could have fibro bathroom wall linings with asbestos inside it and great care will have to be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with the local building authority or council regarding the regulation on bathroom asbestos wall lining removal.
Remove everything except the plumbing. If you keep the toilet plumbing available you won't have to turn the lake off for your house. Also you will need to jack hammer the floor tiles up along with the sand and cement bed actually laid on.
New Single Family Homes  Heartland Homes

Bathroom Renovation and construction
Bathrooms has to be construction properly in the ground-up to make certain that the finished job is correct and true. This also ensures the design and appear of the toilet will have an incredible finish
The Bathroom Renovation Process

Install water and drainage pipe and electrical wires.

Install wall lining and ceiling after which install the tub hob and bath.

Waterproof the floor and shower and bath recess.

Correct nov the floor with sand and cement ready for tiling.

Lay floor and wall tiles after which grout.

Install new bathroom vanity, fittings, and taps - install new electrical.
Colonial Forge  Single Family Homes in Stafford, VA  Prices, Plans, Availability


Paint ceiling and final  one - Plumbing and electrical
At this aspect brand new plumbing is installed for clean hot and cold water and drainage. Careful attention should be taken when positioning the modern plumbing so your plumbing fittings are correct if the tiling is completed. For example: To centre a fitting in a shower recess you should take into consideration the thickness of the wall board, tile glue and tile therefore the fitting is going to be centred after the tiles are in place. The same applies to installing drainage pipes for the toilet; the wall lining and tile thickness has to be taken into account therefore the pipe is within the correct position if the toilet is installed after tiling. Also rough inside the any new electrical wires without connecting them towards the mains power.
Colonial Forge  Single Family Homes in Stafford, VA  Prices, Plans, Availability

Step two - Install wall and ceiling linings
Install your 6mm wall lining fostering to nail the fibro board every 150mm without nailing into the newest pipes and electrical wires. The best way would be to measure and mark the pipe and wire layout onto your new wall board having a pencil while you go. Screw up (or nail) the ceiling lining, plasterboard may be the most common. However if you happen to be laying your tiles from floor to ceiling tend not to install the cornice because done after tiling. If you are not tiling for the ceiling go ahead and install the cornice as soon as the wallboard and ceiling lining are already installed. Also if your bath just isn't freestanding it's simple to from the frame and install the bath. Ensure the bath is installed correctly allowing for the thickness with the tiles and  sure to test all linings and pipes before you decide to continue with your bathroom renovation.

Discovery IV Marrano Homes
MultiFamily House Plan First Floor 055D0865 BEAUTIFUL units in both sides of this Duplex

Step three - Waterproof your bathroom
Waterproof your bathrooms floor, shower recess, and around the bath. When waterproofing a floor make sure that the waterproofing comes 100mm up the walls. The shower recess will need to be waterproofed 100mm above the shower rose outlet. Also the bath needs to be waterproofed 100mm across the lip from the bath about and for the floor. At the doorway use a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof in the lip. Your whole bathroom should now the tanked, hence the all water is only going to go down a drain. Bathroom waterproofing tip: waterproofing is a straightforward job but quality and accuracy is most significant.
Step four - Lay within the cement screed for the bottom.

Before the floor tiles can laid the floor should be smooth and fairly flat with a slight fall to the drainage outlet. To do this you should use sand and cement mix and it's also advisable to give a waterproofing agent into this too. With a level, set a floor level on the doorway. Use the top aluminum angle as the finished floor level and measure along the thickness in the tile plus 10mm for that glue. Mark about the bathroom having a level then screed in your sand and cement mix which has a 1 to 3 degree fall towards the top in the drain outlet. Take your time and acquire it right while using finished level as smooth as you possibly can. When the sand cement mix has set but isn't dry (you are able to walk about it however you it is still a bit soft) rub it over having a house brick. This will remove every one of the small highs and lows and look having a level as you go. Let the lavatory floor fully dry and then you really should have a fantastic surface to tile onto. Tip: the harder work you set into a floor screed the more your tiling is going to be.
New Single Family Homes Heartland Homes
Discovery IV  Marrano Homes

Step five: Tile floor and walls
Lay your tiles on a floor first and after that grout. Then lay your wall tiles ensuring that actually level while you lay. Once the bathroom tiles are already cut and laid, grout all your tiles after which buff the tiles clean.
Step six: Install plumbing fitting and fixtures
Install your plumbing fittings and taps. Also fit all of your towel rails and soap holders. Fit your new bathroom vanity ensuring that it's level and sealed round the top with silicone as well as seal around the tub. Tip: make sure they have been in the right place before you drill in your tiles.
Colonial Forge Single Family Homes in Stafford, VA Prices, Plans, Availability
New Single Family Homes  Heartland Homes

Step seven: painting, and cleaning - enjoy
Paint your ceiling and perform a final clean ensuring things are fitted correctly which there isn't any leaks with your plumbing. - Enjoy your new bathroom.

Comments