500 Interior Design, Beautiful House YouTube

Home Interior Design 500 Interior Design, Beautiful House YouTube

Bathroom Renovation - A Step by Step Guide

Bathrooms are some of the smallest rooms in the house and they are generally also certainly the most expensive to renovate. Bathroom renovation is a job that, if done well, may add value to your home plus a great space brimming with design and light-weight.
500 Interior Design, Beautiful House  YouTube

Bathroom design
Bathroom design could be the first area of your bathroom renovation you should get right. Just replacing the prevailing bathroom with the exact same design will not be enough. The key to great bathroom design would be to design it with the people that are going to put it to use at heart. However ensure that your bathrooms design also offers an overall use factor also.

For example: If you were designing your bathroom for families you could still design the restroom with easy access towards the shower and bath. This would make sure that the design would recieve treatment if you have limited mobility. This means if you choose to sell your own home or if you are renovating for profit your design carries a wider market appeal. Great bathroom design also uses the space well, looking at the sunlight or window space, height and width of fittings, and drainage options. Draw out an idea to scale and all the way down the sizes of your room. Mark the current drainage points after which and water inlet points. Write down a wish list of the bathroom fittings to want and need using their sizes. Now marry the two together to see what fits. Note: Most bathroom drainage and water inlet points could be moved but this may come at expense.
Love Home  Trusted Interior Design  Renovation in Singapore

Bathroom remodel
If you have decided to do the job yourself or part of the task it's time to engage a skip bin and retrieve the previous bathroom. If your house is made pre 1980 you could have fibro bathroom wall linings with asbestos inside it and great care should be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with your neighborhood building authority or council regarding the regulation on bathroom asbestos wall lining removal.
Remove everything except the plumbing. If you keep the toilet plumbing available you'll not need to turn water off for your house. Also you will likely need to jack hammer the ground tiles up and the sand and cement bed they are laid on.
November 2012  Kerala home design and floor plans

Bathroom Renovation and construction
Bathrooms must be construction properly from the ground-up to be sure that the finished job is correct and true. This also ensures the look and appearance of the bathroom could have an incredible finish
The Bathroom Renovation Process

Install water and drainage pipe and electrical wires.

Install wall lining and ceiling after which install the bathtub hob and bath.

Waterproof the floor and shower and bath recess.

Correct late the bottom with sand and cement ready for tiling.

Lay floor and wall tiles after which grout.

Install new bathroom vanity, fittings, and taps - install new electrical.
Impressive Modern Asian House by Tae Ha Interior Design  Decoholic


Paint ceiling and final  one - Plumbing and electrical
At this aspect many new plumbing is installed for clean cold and warm water and drainage. Careful attention needs to be taken when positioning the newest plumbing so the plumbing fittings are correct when the tiling ends. For example: To centre a fitting in a shower recess you have to consider the thickness of the wall board, tile glue and tile hence the fitting will probably be centred following your tiles are set up. The same applies to installing drainage pipes to get a toilet; the wall lining and tile thickness must be looked at hence the pipe is incorporated in the correct position once the toilet is installed after tiling. Also rough in the any new electrical wires without connecting them on the mains power.
Luxury Mansion In London  iDesignArch  Interior Design, Architecture  Interior Decorating

Step two - Install wall and ceiling linings
Install your 6mm wall lining being careful to nail the fibro board every 150mm without nailing into the modern pipes and electrical wires. The best way is to measure and mark the pipe and wire layout on your new wall board which has a pencil when you go. Screw up (or nail) the ceiling lining, plasterboard may be the most common. However if you might be laying your tiles from floor to ceiling usually do not install the cornice because this is best done after tiling. If you happen to be not tiling for the ceiling go ahead and install the cornice following your wallboard and ceiling lining are already installed. Also if your bath isn't freestanding now you can make up the frame and install the bathtub. Ensure the tub is installed correctly making it possible for the thickness from the tiles and  sure to evaluate all linings and pipes before you continue with your bathrooms renovation.

Love Home Trusted Interior Design Renovation in Singapore
500 Interior Design, Beautiful House  YouTube

Step three - Waterproof your bathroom
Waterproof a bath room floor, shower recess, and around the bath. When waterproofing the bottom be sure that the waterproofing comes 100mm up the walls. The shower recess should be waterproofed 100mm over the shower rose outlet. Also the tub needs to be waterproofed 100mm over the lip with the bath around and on the floor. At the doorway put in a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof in the lip. Your whole bathroom should now the tanked, and so the all water is only going to go lower a drain. Bathroom waterproofing tip: waterproofing is an easy job but quality and accuracy is most important.
Step four - Lay inside the cement screed for a floor.

Before the floor tiles can laid the ground has to be smooth and fairly flat which has a slight fall on the drainage outlet. To do this you must use sand and cement mix in fact it is better to put in a waterproofing agent into this also. With a level, set a floor level at the doorway. Use the top aluminum angle because the finished floor level and measure along the thickness in the tile plus 10mm for your glue. Mark right around the restroom with a level after which screed inside your sand and cement mix which has a 1 to 3 degree fall to the top of the drain outlet. Take your time and obtain it right with the finished level as smooth as possible. When the sand cement mix has set but is just not dry (you can walk about it however you it's still somewhat soft) rub it over using a house brick. This will remove all of the small highs and lows and look which has a level because you go. Let the lavatory floor fully dry and then you needs to have an excellent surface to tile onto. Tip: the harder work you set into a floor screed the easier your tiling will likely be.
November 2012 Kerala home design and floor plans
Love Home  Trusted Interior Design  Renovation in Singapore

Step five: Tile floor and walls
Lay your tiles on a floor first after which grout. Then lay your wall tiles making sure that they are level when you lay. Once the lavatory tiles have been cut and laid, grout your entire tiles and after that buff the tiles clean.
Step six: Install plumbing fitting and fixtures
Install your plumbing fittings and taps. Also fit all your towel rails and soap holders. Fit your brand-new bathroom vanity making sure it is level and sealed throughout the top with silicone as well as seal around the bathtub. Tip: make sure they are in the right place before you decide to drill into the tiles.
Impressive Modern Asian House by Tae Ha Interior Design Decoholic
November 2012  Kerala home design and floor plans

Step seven: painting, and cleaning - enjoy
Paint your ceiling and do a final clean making certain things are fitted correctly knowning that there aren't any leaks within your plumbing. - Enjoy your brand-new bathroom.

Comments