Windsor Hills Villa Floor Plans Windsor Hills Resort for Sale

Single Family Home Designs Single Family Home Designs Windsor Hills Villa Floor Plans Windsor Hills Resort for Sale

Bathroom Renovation - A Step by Step Guide

Bathrooms are one of the smallest rooms inside your home plus they are also the most expensive for renovate. Bathroom renovation is really a job that, if done well, will add value with a home as well as a great space packed with design and lightweight.
Windsor Hills Villa Floor Plans  Windsor Hills Resort for Sale

Bathroom design
Bathroom design may be the first part of a bath room renovation you should get right. Just replacing the present bathroom with the exact same design might not be enough. The key to great bathroom design is to design it with the individuals who will certainly utilize it in your mind. However be sure that your bathroom design also has a broad use factor also.

For example: If you were designing your bathrooms for families you can still design the bathroom with quick access for the shower and bath. This would ensure that the design would recieve treatment for people with limited mobility. This means if you sell your own home or if you are renovating for profit your design features a wider market appeal. Great bathroom design also uses the room well, taking into account the sunlight or window space, size of fittings, and drainage options. Draw out an agenda to scale and all the way down the sizes of one's room. Mark the prevailing drainage points then and water inlet points. Write down a wish listing of the lavatory fittings to wish and want using their sizes. Now marry both together and see what fits. Note: Most bathroom drainage and water inlet points may be moved but this does come at extra cost.
house floor plans with pictures  Jupiter Farms The Oak Model single family home floor plans

Bathroom remodel
If you have chosen to complete the task yourself or part of the project it's time to work with a skip bin and pull out that old bathroom. If your house was developed pre 1980 you may have fibro bathroom wall linings with asbestos in it and great care will need to be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with any local building authority or council regarding the regulation on bathroom asbestos wall lining removal.
Remove everything except the plumbing. If you keep the toilet plumbing in place you will not need to turn the river off for the complete house. Also you should jack hammer a floor tiles up along with the sand and cement bed actually laid on.
Dryden  Single Family Home Floor Plans  Claridge Homes

Bathroom Renovation and construction
Bathrooms has to be construction properly through the start to make certain that the finished job is correct and true. This also ensures the design and appearance of the toilet will have a great finish
The Bathroom Renovation Process

Install water and drainage pipe and electrical wires.

Install wall lining and ceiling then install the bath hob and bath.

Waterproof the ground and shower and bath recess.

Correct late the bottom with sand and cement ready for tiling.

Lay floor and wall tiles and then grout.

Install new bathroom vanity, fittings, and taps - install new electrical.
Free Blueprints  New Line Home Design: Single Family Homes


Paint ceiling and final  one - Plumbing and electrical
At now all new plumbing is installed for clean hot and cold water and drainage. Careful attention should be taken when positioning the brand new plumbing so the plumbing fittings are correct once the tiling ends. For example: To centre a fitting in the shower recess you need to consider the thickness in the wall board, tile glue and tile therefore the fitting will probably be centred as soon as the tiles are in position. The same pertains to installing drainage pipes for the toilet; the wall lining and tile thickness must be looked at therefore the pipe is in the correct position if the toilet is installed after tiling. Also rough within the any new electrical wires without connecting them to the mains power.
Advantage X  Marrano Homes

Step two - Install wall and ceiling linings
Install your 6mm wall lining being careful to nail the fibro board every 150mm without nailing into the new pipes and electrical wires. The best way is usually to measure and mark the pipe and wire layout on your new wall board which has a pencil when you go. Screw up (or nail) the ceiling lining, plasterboard may be the most common. However if you are laying your tiles from floor to ceiling do not install the cornice as this is most effectively achieved after tiling. If you might be not tiling for the ceiling go on and install the cornice as soon as the wallboard and ceiling lining are already installed. Also if your bath is just not freestanding it's simple to make up the frame and install the tub. Ensure the tub is installed correctly permitting the thickness in the tiles and  sure to check all linings and pipes prior to deciding to continue with a bath room renovation.

house floor plans with pictures Jupiter Farms The Oak Model single family home floor plans
Windsor Hills Villa Floor Plans  Windsor Hills Resort for Sale

Step three - Waterproof a bath room
Waterproof your bathrooms floor, shower recess, and around the bath. When waterproofing the bottom make sure that the waterproofing comes 100mm in the walls. The shower recess must be waterproofed 100mm over the shower rose outlet. Also the tub should be waterproofed 100mm higher than the lip from the bath about and for the floor. At the doorway install a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof into the lip. Your whole bathroom should now the tanked, so the all water is only going to drop a drain. Bathroom waterproofing tip: waterproofing is a simple job but quality and accuracy is most significant.
Step four - Lay inside the cement screed for the floor.

Before the floor tiles can laid the bottom have to be smooth and fairly flat which has a slight fall for the drainage outlet. To do this you have to use sand and cement mix and it's also best to give a waterproofing agent into this at the same time. With a level, set the ground level at the doorway. Use the top aluminum angle as the finished floor level and measure along the thickness from the tile plus 10mm for the glue. Mark around the restroom using a level then screed inside your sand and cement mix which has a 1 to 3 degree fall on the top with the drain outlet. Take your time and acquire it right while using finished level as smooth as you possibly can. When the sand cement mix has set but is not dry (you'll be able to walk on it however you it is a bit soft) rub it over having a house brick. This will remove all the small highs and lows and look with a level when you go. Let the lavatory floor fully dry and then you must have an excellent surface to tile onto. Tip: greater work you put into the bottom screed the easier your tiling is going to be.
Dryden Single Family Home Floor Plans Claridge Homes
house floor plans with pictures  Jupiter Farms The Oak Model single family home floor plans

Step five: Tile floor and walls
Lay your tiles on the floor first and then grout. Then lay your wall tiles making sure that they are level as you lay. Once the bathroom tiles are actually cut and laid, grout your entire tiles after which buff the tiles clean.
Step six: Install plumbing fitting and fixtures
Install your entire plumbing fittings and taps. Also fit your towel rails and soap holders. Fit a new bathroom vanity ensuring it can be level and sealed throughout the top with silicone as well as seal around the tub. Tip: make sure they come in the right place before you drill to your tiles.
Free Blueprints New Line Home Design: Single Family Homes
Dryden  Single Family Home Floor Plans  Claridge Homes

Step seven: painting, and cleaning - enjoy
Paint your ceiling and do a final clean making certain it is all totally fitted correctly which there are no leaks inside your plumbing. - Enjoy your brand-new bathroom.

Comments